SRX AWD V6-3.0L (2010)
Ignition Coil: Service and Repair
Ignition Coil Replacement - Bank 2
Ignition Coil Replacement - Bank 2
Removal Procedure
1. Remove the intake manifold cover. Refer to Upper Intake Manifold Replacement (See: Engine, Cooling and Exhaust/Engine/Intake
Manifold/Service and Repair/Upper Intake Manifold Replacement).
2. Disconnect the engine wiring harness electrical connector(s) (5) from the ignition coil(s) (4).
3. Remove the ignition coil bolt(s).
4. Remove the ignition coil(s).
Installation Procedure