SRX AWD V6-3.0L (2010)
Fuel Level Sensor: Service and Repair
Primary Fuel Level Sensor Replacement
Removal Procedure
Warning
Fuel Vapors can collect while servicing fuel system parts in enclosed areas such as a trunk. To reduce the risk of fire and increased exposure to vapors:
*
Use forced air ventilation such as a fan set outside of the trunk.
*
Plug or cap any fuel system openings in order to reduce fuel vapor formation.
*
Clean up any spilled fuel immediately.
*
Avoid sparks and any source of ignition.
*
Use signs to alert others in the work area that fuel system work is in process.
1. Remove the primary fuel tank module. Refer to Primary Fuel Tank Module Replacement (NT7, NU5) (See: Powertrain Management/Fuel
Delivery and Air Induction/Fuel Tank Unit/Service and Repair/Primary Fuel Tank Module Replacement (NT7, NU5))Primary Fuel Tank Module
Replacement (NA3, NE9, NF9) (See: Powertrain Management/Fuel Delivery and Air Induction/Fuel Tank Unit/Service and Repair/Primary Fuel
Tank Module Replacement (NA3, NE9, NF9))Primary Fuel Tank Module Replacement (China) (See: Powertrain Management/Fuel Delivery and
Air Induction/Fuel Tank Unit/Service and Repair/Primary Fuel Tank Module Replacement (China)).
2. Using two flat-bladed tools, carefully pull both locking tabs (1) outward while simultaneously lifting the level sensor.