SRX AWD V6-3.0L (2010)
Negative: Service and Repair
Battery Negative Cable Replacement
Battery Negative Cable Replacement
Removal Procedure
1. Remove the battery fuse block/engine control module cover.
2. Disconnect the negative battery terminal (1).Refer to Battery Negative Cable Disconnection and Connection (See: Battery Negative Cable
Disconnection and Connection)
3. Remove the negative battery ground terminal (2).
4. Remove the auxiliary negative battery ground bolt (2).
5. Remove the engine block battery ground terminal (1) and bolt (2).
6. Remove the negative battery cable (3).