SRX AWD V6-3.0L (2010)
11. Remove the power steering gear outlet and fluid reservoir inlet hose bracket fasteners (1).
12. Remove the power steering gear outlet and fluid reservoir inlet hose as an assembly (2) from the vehicle.
Installation Procedure
1. Position the power steering gear outlet and fluid reservoir inlet hose as an assembly (2) in the vehicle.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
2. Install the power steering gear outlet and fluid reservoir inlet hose bracket fasteners (1) and tighten to 9 Nm (80 lb in).