SRX AWD V6-3.0L (2010)
Note: Ensure that the J 45201 is fully seated into the transaxle seal bore.
5. Insert the collet piece (2) of the DT-45201 - Cooler Line Seal Remover into the cooler line seal.
6. Insert the forcing screw piece (1) of the DT-45201 - Cooler Line Seal Remover into the collet (2).
7. Tighten the forcing screw (1) until snug.
8. Thread the collar piece (1) of the DT-45201 - Cooler Line Seal Remover onto the collet (3) until snug.