SRX AWD V6-3.0L (2010)
5. Install the transmission mount to bracket through bolt (1) and tighten to 100 Nm (74 lb ft).
6. Install the rear mount to frame fasteners (1, 2) and tighten to 110 Nm (81 lb ft).
7. Remove the jack stand.
8. Install the left tire and wheel. Refer to Tire and Wheel Removal and Installation (See: Maintenance/Wheels and Tires/Service and Repair).
9. Lower the vehicle.
Transmission Brace Replacement
Transmission Brace Replacement