SRX AWD V6-3.0L (2010)
Wiring Harness: Service and Repair
Automatic Transmission Wiring Harness Replacement
Removal Procedure
1. Remove control valve body cover. Refer to Control Valve Body Cover Replacement (See: Valve Body/Service and Repair/AF40-6 - Automatic
Transmission/Control Valve Body Cover Replacement).
2. Remove control valve body. Refer to Control Valve Body Replacement (See: Valve Body/Service and Repair/AF40-6 - Automatic
Transmission/Control Valve Body Replacement).
3. Remove the transmission control module. Refer to Transmission Control Module Replacement (See: Control Module/Service and Repair/AF40-6
- Automatic Transmission).
4. Remove the wiring harness.
*
Remove the clip (1).
*
Lift out the wiring harness (2).
Installation Procedure