SRX AWD V6-3.6L (2008)
Refrigerant Pressure Sensor / Switch: Service and Repair
Air Conditioning (A/C) Refrigerant Pressure Sensor Replacement
Tools required
J 39400-A Halogen Leak Detector
Removal Procedure
Important: There is no Schrader valve under the pressure sensor.
1. Recover the refrigerant. Refer to Refrigerant Recovery and Recharging (See: Heating and Air Conditioning/Service and Repair/Refrigerant
Recovery and Recharging) .
2. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (See: Maintenance/Vehicle Lifting/Service and Repair) .
3. Remove the front air deflector retainers.
4. Remove the front air deflector.
5. Disconnect the electrical connector (1) from the A/C refrigerant pressure sensor (2).
6. Remove the A/C refrigerant pressure sensor.
Installation Procedure
1. Install a new O-ring to the refrigerant pressure sensor. Refer to O-Ring Replacement (See: Heating and Air Conditioning/Coupler HVAC/A/C
Coupler O-ring/Service and Repair) .
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice) .