SRX AWD V8-4.6L VIN A (2004)
1. Position the adjustable brake pedal motor to the adjustable brake pedal motor bracket.
IMPORTANT: Remove the new motor inserts, reuse original inserts.
1.1.
Install the motor insert (2) into the motor grommet (3) of the new motor.
NOTE: Refer to Fastener Notice in Service Precautions.
1.2.
Install the motor to motor bracket bolts (1) to secure the motor to the motor plate (4).
Tighten
Tighten the bolts to 4 N.m (36 lb in).
IMPORTANT:
-
Ensure that the adjustable accelerator pedal and adjustable brake pedal are synchronized in the full forward front of vehicle position.
-
Do not exceed 0.5 N.m (4.43 lb in) of torque.
2. Synchronize the accelerator pedal to the full forward, front of vehicle position. Using an adjustable wrench on the cable end and rotate the cable to
move the pedal to the full forward front of vehicle position.
3. Remove the adjustable wrench from the cable.
4. Connect the adjustable brake pedal cable to the motor.
5. Insert a square drive tool into the adjustable brake pedal motor.
IMPORTANT: Do not exceed 0.5 N.m (4.43 lb in) of torque.
6. Synchronize the adjustable brake pedal to the full forward, front of vehicle position. Carefully rotate the adjustable brake pedal motor until the
