SRX AWD V8-4.6L VIN A (2004)
Pedal Positioning Switch: Service and Repair
SWITCH REPLACEMENT - BRAKE AND ACCELERATOR PEDAL ADJUSTER
REMOVAL PROCEDURE
CAUTION: Refer to SIR Caution in Service Precautions.
1. Disable the SIR system. Refer to SIR Disabling and Enabling Zone 3 in SIR.
2. Disconnect the adjuster pedal switch connector at the base of the steering column.
3. Remove the wire harness straps from the wire harness assembly.
4. Remove the adjuster pedal switch lead from the wire harness assembly.
5. Remove the 2 pan head tapping screws (2) from the lower trim cover (1).
6. Remove the lower trim cover (2).
7. Remove the adjuster pedal switch assembly (2) from the lower trim cover (1).