SRX AWD V8-4.6L VIN A (2004)
2. Install the adjuster pedal switch assembly (2) into the lower trim cover (1).
3. Install the lower trim cover (1).
4. Install the 2 pan head tapping screws (2) into the lower trim cover (1).
Tighten
Tighten the screws to 3.5 N.m (31 lb in).
5. Route the adjuster pedal switch lead into the wire harness assembly.
6. Install the wire harness straps onto the wire harness assembly.
7. Connect the adjuster pedal switch connector at the base of the steering column.
8. Enable the SIR system. Refer to SIR Disabling and Enabling Zone 3 in SIR.
