SRX AWD V8-4.6L VIN A (2004)
Front Door Latch: Service and Repair
Latch Replacement - Front Door
Removal Procedure
1. Raise the window to the full up position.
2. Remove the door trim panel.
3. Remove the water deflector.
4. Disconnect the lock cylinder rod from the door latch, if equipped.
5. Disconnect the outside door handle rod (1) from the door latch by opening the clip (2).
6. Remove the lock knob rod from the rod guide (2).
7. Remove the inside handle rod from the rod guide (1).
8. Remove the door latch screws (3).
9. Remove the door latch from the door with the inside door handle rod and lock rod attached.
10. Use a small flat-bladed tool to lift the electrical connector lock (2) and disconnect the electrical connector.
11. Remove the handle rod and lock rod from the door latch.
Installation Procedure
1. Install the inside door handle rod and lock rod to the door latch.
2. Install the electrical connector.
3. Install the door latch into the door.