SRX AWD V8-4.6L VIN A (2004)
4. Install the lock cylinder rod to the door latch.
Notice: Refer to Fastener Notice in Service Precautions.
5. Install the door latch screws (3).
Tighten the screws to 10 N.m (89 lb in).
6. Install the outside door handle rod (1) into the latch clip (2).
7. Close the clip.
8. Install the lock knob rod into the rod guide (2).
9. Install the inside handle rod into the rod guide (1).
10. Inspect for the proper operation of the door handles, lock cylinder, and door latch.
11. Install the water deflector.
12. Install the door trim panel.