SRX AWD V8-4.6L VIN A (2004)
Hood Hinge: Service and Repair
Hood Hinge Replacement
Removal Procedure
1. Open and support the hood.
2. Using a wax pencil, scribe the location of the hood hinge on the hood.
3. Apply tape to corners of panel and adjacent surfaces to help prevent paint damage.
4. Remove the hood.
5. Remove the fender.
6. Remove the bolts (1) that secure the hinge to the motor compartment.
7. Remove the hinge from the vehicle.
Installation Procedure
1. Install the hinge to the vehicle.
Notice: Refer to Fastener Notice () in Service Precautions.