SRX AWD V8-4.6L VIN A (2004)
8. Install the engine mount lower retaining nuts.
Tighten the nuts to 80 N.m (59 lb ft).
9. Install the washer bottle to knuckle retaining bolts.
Tighten the bolts to 6 N.m (53 lb ft).
10. Install the yoke to shock retaining bolt.
Tighten the bolt to 180 N.m (133 lb ft).
11. Install the yoke to shock retaining nut.
Tighten the nut to 180 N.m (133 lb ft).
12. Install the upper ball joint retaining nut.
Tighten the nut to 20 N.m (15 lb ft plus 210 degrees).
13. Tighten the ABS module retaining nuts (2,3).
Tighten the nuts to 8 N.m (71 lb in).
