SRX AWD V8-4.6L VIN A (2004)
17. Secure both front assist handles in order to hold the headliner in place.
Tighten the assist handle screws to 2 N.m (18 lb in).
18. Install the assist handle bezel covers.
19. Install the dome lamp.
20. Install the cargo lamp.
Notice: Refer to Fastener Notice () in Service Precautions.
21. Secure both sunshades.
Tighten the outer sunshade bezel fasteners to 2 N.m (18 lb in).
22. Secure the right side sunshade rod retainer.
Tighten the right side to 10 N.m (88 lb in).
23. Secure the left side sunshade rod retainer.
Tighten the left side to 2 N.m (18 lb in).
24. Position the sunshades to the headliner.
25. Connect the connector lead for the antenna module. to the rear window.
26. Install the coat hook fastener (2).
Tighten the fastener to 10 N.m (88 lb in).