SRX AWD V8-4.6L VIN A (2004)
1. Position the retainer (2) to the drive tube (4) and the track (3).
2. Secure the upper half of the retainer to the lower half of the retainer.
3. Measure the tracks side to side to ensure that the tracks are parallel.
NOTE: Refer to Fastener Notice in Service Precautions.
4. Install the rear track screws.
Tighten
Tighten the screws to 5 N.m (44 lb in).
5. Install the rear sunshade assembly.
6. Install the headliner.
7. Install the center and rear vent windows.
8. Perform the rear vent window sunshade initialization procedure. Refer to Sunroof Rear Window Initialization Process.