SRX AWD V8-4.6L VIN A (2004)
6. Remove either the rear left or rear right sunroof rear window track (3).
7. Cut the tie straps securing the electrical harness to the drive and return tubes. Discard the tie straps.
8. Release the drive (1) and return (2) tubes from the motor/actuator block. Use a flat-bladed tool to release the drive and return tubes.
9. Hold onto the motor block and gently pry the return tube from the motor block.
10. Carefully remove the drive and return tubes from the motor/actuator compartment.
11. Remove the vent window motor/actuator block from the motor compartment.
INSTALLATION PROCEDURE
