SRX AWD V8-4.6L VIN A (2004)
1. Tilt the window (2). Slide the window rearward into position.
2. Position the forward weatherstrip (1) under the forward edge of the center window flange (3).
3. Firmly set the center window panel (2) into position.
4. Ensure that the forward and rearward window seams are centered.
NOTE: Refer to Fastener Notice in Service Precautions.
5. Install the 5 panel attaching screws.
Tighten
Tighten the screws to 5 N.m (44 lb in).
Sunroof Window Replacement (Front)
SUNROOF WINDOW REPLACEMENT (FRONT)
REMOVAL PROCEDURE