SRX AWD V8-4.6L VIN A (2004)
Sunroof / Moonroof Switch: Removal and Replacement
Sunroof Switch Replacement
Removal Procedure
1. Remove the front overhead console.
2. Remove the screws securing the sunroof switch (1) to the overhead console.
3. Disconnect the electrical connector.
4. Remove the switch.
Installation Procedure
1. Connect the electrical connector.
Notice: Refer to Fastener Notice () in Service Precautions.
2. Install the screws securing the sunroof switch (1) to the overhead console.
Tighten the screws to 2 N.m (18 lb in).
3. Install the front overhead console.
