SRX AWD V8-4.6L VIN A (2004)
1. Slide the window panel guide assembly (2) into the rear track rail.
2. Install the front extension to the track.
3. Position the rear track to the sunroof frame.
4. Install the rear track screws (1, 5).
5. Loosely install the screws for the entire length of the tracks. Ensure that the track being serviced is parallel to the other track.
Notice: Refer to Fastener Notice () in Service Precautions.
6. Install the rear track front extension screw (3, 5)
Tighten the screws to 5 N.m (44 lb in).
7. Install the rear, center, and front windows.
8. Install the sunroof exterior trim covers to the side of the track that was serviced.
