SRX AWD V8-4.6L VIN A (2004)
5. Install the seat cover (1) on to the seat bottom.
6. Connect all J channel retainers (1).
7. Install the seat into the vehicle.
Seat Cushion Replacement - Front
Seat Cushion Replacement - Front
Removal Procedure
Caution: Refer to SIR Caution () in Service Precautions.
1. Disable the SIR System. Refer to SIR Disabling and Enabling Zone 7 () driver's seat and SIR Disabling and Enabling Zone 9 () and passenger seat.
2. Move the seat to the full forward position.
3. Remove the retaining nuts (1) securing the seat cushion to the seat adjuster assembly.
4. Lift the front of the seat cushion upwards.