cadillac Workshop Repair Guides

Cadillac Workshop Service and Repair Manuals

Recall - Front Seat Anchor Tab Inspection|Page 13796 > < Recall - Front Seat Anchor Tab Inspection|Page 13794
Page 3
background image

this bulletin. This could be done by mailing to such customers a copy of the customer letter shown in this bulletin. Recall follow-up cards should not be
used for this purpose, since the customer may not as yet have received the notification letter.

In summary, whenever a vehicle subject to this recall enters your vehicle inventory, or is in your dealership for service in the future, please take the steps
necessary to be sure the recall correction has been made before selling or releasing the vehicle.

Disclaimer

Service Procedure

Inspection Procedure

The following information provides instructions for inspecting the front seat track to floor pan attachments on both the driver and front passenger seats.

1.

Open the left front door and move the front driver's seat to the full rearward position.

2.

Inspect the INBOARD and OUTBOARD front seat track attachments (1) to the floor pan. Make sure that the hooks are inserted into the slots (2)
in the floor pan and are not on top of the carpet (3) or on top of the floor pan underneath the carpet.

^

If one or both of the front seat tracks attachment are NOT inserted into the slots in the floor pan, proceed to the Repair Procedure section
below.

^

If both the INBOARD and OUTBOARD front seat tracks are inserted into the slots (4) in the floor pan on both driver and passenger seats, no
repairs are required. Install the GM Recall Identification Label.

Repair Procedure

Recall - Front Seat Anchor Tab Inspection|Page 13796 > < Recall - Front Seat Anchor Tab Inspection|Page 13794