SRX AWD V8-4.6L VIN A (2004)
Power Door Lock Switch: Service and Repair
Front Door Switch Replacement
FRONT DOOR SWITCH REPLACEMENT
REMOVAL PROCEDURE
1. Insert a flat-bladed tool under the front edge of the front door switch.
2. Push the tool firmly towards the switch to disengage the retainer.
3. Lift up on the rear of the switch plate to remove it from the door trim panel.
4. Disconnect electrical connectors.
5. Remove the appropriate switch from the bezel by disengaging the side snap walls with a small flat-bladed tool.
INSTALLATION PROCEDURE
