SRX AWD V8-4.6L VIN A (2004)
Power Seat Switch: Procedures
Folding Seat Switch Replacement - Rear #2 (Rear Qtr Trim Front)
FOLDING SEAT SWITCH REPLACEMENT - REAR SEAT NO.2 - REAR QUARTER TRIM FRONT
REMOVAL PROCEDURE
1. Remove the body side rear trim panel.
2. Remove the folding seat switch (2) from the trim panel.
INSTALLATION PROCEDURE
1. Install the folding seat switch (2) to the trim panel.
2. Install the body side rear trim panel.
3. Calibrate the seat. Refer to Power Folding Seat Calibration.
Folding Seat Switch Replacement - Rear #2 (Rear Qtr Trim Rear)
FOLDING SEAT SWITCH REPLACEMENT - REAR SEAT NO.2 - REAR QUARTER TRIM REAR
REMOVAL PROCEDURE
