cadillac Workshop Repair Guides

Cadillac Workshop Service and Repair Manuals

Door Window Channel|Page 13962 > < Weatherstrip Replacement - Rear Door Upper Auxiliary|Page 13957
Page 1
background image

Rear Door Window Glass Weatherstrip: Service and Repair
Door Window Channel

Window Channel Replacement - Rear Door Front

Window Channel Replacement - Rear Door Front

Removal Procedure

1. Ensure that the window is fully closed.
2. Remove the door trim panel.
3. Remove the water deflector.

4. Loosen the lower bolt.
5. Remove the upper bolt.
6. Rotate the top of the front window channel forward.
7. Lift upward on the window channel to disengage the lower bolt from the keyhole slot.
8. Remove the front window channel from the door.

Installation Procedure

1. Install the front window channel into the door, top end first.
2. Insert the lower bolt into the keyhole slot.
3. Rotate the top of the front window channel rearward and align on the lower edge of the window.

Notice:  Refer to Fastener Notice in Service Precautions.

4. Install the upper bolt.

Tighten the bolts to 9 N.m (80 lb in).

5. Install the water deflector.
6. Install the door trim panel.

Window/Division Channel - Rear Door Stationary

Window/Division Channel - Rear Door Stationary

Removal Procedure

Door Window Channel|Page 13962 > < Weatherstrip Replacement - Rear Door Upper Auxiliary|Page 13957