SRX AWD V8-4.6L VIN A (2004)
Parking Brake Cable: Service and Repair
Park Brake Cable Replacement - Right Rear
Park Brake Cable Replacement - Right Rear
^
Tools Required
-
J 37043 Park Brake Cable Release Tool
Caution: Refer to Brake Dust Caution in Service Precautions.
Removal Procedure
1. Raise the vehicle and suitably support. Refer to Vehicle Lifting.
2. Remove the right rear tire and wheel assembly.
3. Pull down on the intermediate park brake cable (2) near the park brake cable connector (1).
4. Disconnect the intermediate park brake cable (2) from the park brake connector (1).
5. Disconnect the right rear park brake cable (2) from the intermediate park brake cable connector (3).
6. Use the J 37043 in order to depress the right rear brake cable retainer.
7. Remove the right rear park brake cable (2) from the right rear park brake cable bracket (1).
8. Use the J 37043 in order to depress the right rear brake cable retainer.
9. Remove the right rear park brake cable from the right rear cable bracket (1).
10. Disconnect the right rear park brake cable (2) from the right rear park brake actuator lever (3).
11. Remove the right rear park brake rear cable (2).
Installation Procedure