cadillac Workshop Repair Guides

Cadillac Workshop Service and Repair Manuals

Camshaft Position (CMP) Actuator Replacement - Bank 2 (Left) Exhaust|Page 2670 > < Camshaft Position (CMP) Actuator Replacement - Bank 2 (Left) Exhaust|Page 2668
Page 47
background image

3. Notice:  Refer to Torque Reaction Against Timing Drive Chain Notice in Service Precautions.

Notice:  Refer to Fastener Notice.

Use an open end wrench on the hex cast into the left exhaust camshaft to prevent the camshaft from rotating when tightening the camshaft oil
control valve.
Tighten the camshaft oil control valve to 120 Nm (89 ft. lbs.).

4. Remove the EN 46327 (1).

Camshaft Position (CMP) Actuator Replacement - Bank 2 (Left) Exhaust|Page 2670 > < Camshaft Position (CMP) Actuator Replacement - Bank 2 (Left) Exhaust|Page 2668