SRX AWD V8-4.6L VIN A (2004)
Lifter / Lash Adjuster: Service and Repair
Valve Lifter Replacement - Left
Valve Lifter Replacement - Left
Removal Procedure
1. Remove the left valve rocker arms.
2. Important: Ensure each camshaft follower remains matched to the original stationary hydraulic lash adjuster (SHLA) and original location the
components were assembled in.
Remove the SHLA from the left cylinder head bores.
3. Clean and inspect the valve lifters.
Installation Procedure
1. Ensure the crankshaft is in the Top Dead Center (TDC) position for the number one cylinder.
2. Notice: Refer to Valve Lifter Priming Notice in Service Precautions.
Fill the SHLA with clean engine oil GM P/N 12378006 or equivalent. Take precautions to prevent scratching the pivot sphere area (1) of the
SHLA.