SRX AWD V8-4.6L VIN A (2004)
Rocker Arm Assembly: Service and Repair
Valve Rocker Arm Replacement - Left
Valve Rocker Arm Replacement - Left
Removal Procedure
1. Remove the left camshafts.
2. Important: Ensure each camshaft follower remains matched to the original stationary hydraulic lash adjuster (SHLAs) and original location the
components were assembled in.
Remove the camshaft followers from the left cylinder head.
3. Clean and inspect the rocker arms.
Installation Procedure
1. Apply a liberal amount of lubricant GM P/N 12345001 or equivalent to the roller pivot pocket (2) and valve slot areas (1) of the camshaft
followers.
