SRX AWD V8-4.6L VIN A (2004)
1. Route the drive belt to the accessory drive pulleys, excluding the tensioner (2) and the water pump pulley (1).
2. Rotate the drive belt tensioner (2) clockwise.
3. Slide the drive belt behind the drive belt tensioner and around the tensioner pulley. Access the belt from the side of the tensioner pulley in the
location of the lower reservoir mounting nut.
4. Route the drive belt under the water pump pulley (1).
5. Important: Ensure the drive belt is properly aligned and seated into the grooves of the accessory drive pulleys.
Release the drive belt tensioner and inspect the drive belt for proper seating in the accessory drive pulleys.
6. Install the power steering fluid reservoir to the engine.
7. Install the air cleaner outlet duct.
8. Install the fuel injector sight shield.
