SRX AWD V8-4.6L VIN A (2004)
Engine Mount: Service and Repair
Engine Mount Bracket Replacement - Left
Engine Mount Bracket Replacement - Left
Removal Procedure
1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.
2. Remove the left exhaust manifold.
3. Install a screw jack with a block of wood under the oil pan for support.
4. Remove the upper engine mount retaining nut.
5. Important: Ensure not to distort or bend the engine mount heat shield.
Remove the left engine mount bracket retaining bolts.
6. Remove the left engine mount bracket.
