SRX AWD V8-4.6L VIN A (2004)
11. Notice: Refer to Torque Reaction Against Timing Drive Chain Notice in Service Precautions.
Use an open-end wrench on the hex cast into the camshaft in order to prevent the camshaft from rotating when tightening the oil control valve.
Tighten the oil control valve to 120 Nm (89 ft. lbs.).
12. Install the left secondary timing chain tensioner.
13. Install the right secondary timing chain.
14. Remove the EN 46328.
15. Install the left camshaft position actuator housing.
