SRX AWD V8-4.6L VIN A (2004)
Heater Hose: Service and Repair
Heater Hose Replacement - Inlet
HEATER HOSE REPLACEMENT - INLET
TOOLS REQUIRED
J 38185 Hose Clamp Pliers
REMOVAL PROCEDURE
1. Drain the cooling system. Refer to Draining and Filling Cooling System in Cooling System.
2. Remove the battery tray.
3. Remove the cowl panel retaining bolts.
4. Remove the cowl panel.
5. Using J 38185 slide the clamp away from the base of the heater inlet hose.
6. Remove the inlet heater hose from the heater core.
7. Using J 38185 slide the clamp away from the base of the heater inlet hose.
8. Remove the clamp and hose from the engine cooling thermostat assembly.
INSTALLATION PROCEDURE
