SRX AWD V8-4.6L VIN A (2004)
1. Position the outlet heater hose assembly into the vehicle.
2. Install the outlet hose to the heater core.
3. Using J 38185 slide the hose clamp back into the original position on the hose.
4. Install the outlet hose to the engine cooling thermostat assembly.
5. Using J 38185 slide the hose clamp back into the original position on the hose.
6. Install the cowl panel.
NOTE: Refer to Fastener Notice in Service Precautions.
7. Install the cowl panel retaining bolts.
Tighten
Tighten the bolts to 6 N.m (13 lb ft).
8. Install the battery tray.
9. Fill the cooling system. Refer to Draining and Filling Cooling System in Cooling System.
