SRX AWD V8-4.6L VIN A (2004)
7. Install the front air deflector.
8. Install the front air deflector retainers.
9. Lower the vehicle.
10. Install new O-rings on the A/C liquid line.
11. Connect the condenser tube to the A/C liquid line.
12. Connect the condenser tube from the radiator mounting clip.
13. Install the condenser tube quick connect fitting.
14. Install the air cleaner intake duct.
15. Evacuate and recharge the A/C system. Refer to Refrigerant Recovery and Recharging.
16. Leak test the fittings of the component using J 39400-A.
Suction Hose Replacement (Without RPO Code C57)
SUCTION HOSE REPLACEMENT (WITHOUT RPO CODE C57)
TOOLS REQUIRED
-
J 39400-A Halogen Leak Detector
-
J 45689 A/C Quick Joint Tool
REMOVAL PROCEDURE
1. Recover the refrigerant. Refer to Refrigerant Recovery and Recharging.
2. Remove the suction hose quick connect fitting
3. Remove the suction hose retaining screw from the clamp.
4. Separate the suction line from the clamp.
5. Remove the air cleaner assembly.