SRX AWD V8-4.6L VIN A (2004)
6. Raise the vehicle.
7. Install new O-rings to the auxiliary evaporator inlet and outlet lines.
8. Install the auxiliary evaporator outlet line nut to the auxiliary HVAC module.
Tighten
Tighten the nut to 9 N.m (80 lb in).
9. Install the auxiliary evaporator inlet line nut to the auxiliary HVAC module.
Tighten
Tighten the nut to 9 N.m (80 lb in).
10. Lower the vehicle.
11. Recharge the A/C system. Refer to Refrigerant Recovery and Recharging.
12. Leak test the fittings of the component using J 39400-A.