SRX AWD V8-4.6L VIN A (2004)
12. Remove the left center pillar trim panel.
13. Remove the SIS CPA (1) from the left 515 connector (2).
14. Remove the SIS connector (2) from the 515 (3).
ENABLING PROCEDURE
1. Remove the key from the ignition switch.
2. When enabling the 515 proceed to step 3, if the roof rail module needs enabling then go to step 6.
3. Connect the 515 connector (2) to the SIS (3).
4. Connect the CPA (1) to the SIS connector (2).
5. Install the left center pillar trim panel.