SRX AWD V8-4.6L VIN A (2004)
Headlamp Igniter Module: Service and Repair
Headlamp Ballast Replacement
Removal Procedure
Caution: Refer to Battery Disconnect Caution in Service Precautions.
Caution: The high intensity discharge system produces high voltage and current. To reduce the risk of severe shocks and burns:
^
Never open the high intensity discharge system ballast or the arc tube assembly starter.
^
Never probe between the high intensity discharge system ballast output connector and the arc tube assembly.
Caution: The high intensity discharge system produces high voltage and current. In order to reduce the risk of severe shocks and burns, the battery
negative cable must be disconnected any time service work is being performed on or around the high intensity discharge system.
1. Remove the headlamp.
2. Remove the screws (1) from the headlamp.
Important: Be careful when disconnecting the electrical connectors.
3. Disconnect the electrical connectors.
