SRX AWD V8-4.6L VIN A (2004)
1. Install new O-rings to the auxiliary front suction line.
2. Install the auxiliary front suction line to the vehicle.
3. Connect the auxiliary front suction line to the body retainers
4. Connect the auxiliary front suction line to the auxiliary rear suction line.
NOTE: Refer to Fastener Notice in Service Precautions.
5. Tighten the fitting of the auxiliary front suction line.
Tighten
Tighten the fitting to 9 N.m (80 lb in).
6. Connect the auxiliary front suction line to the front suction line.
7. Install the auxiliary front suction line to front suction line quick connect fitting.
8. Lower the vehicle.
9. Evacuate and recharge the A/C system. Refer to Refrigerant Recovery and Recharging.
10. Leak test the fittings of the component using J 39400-A.
Evaporator Tube Replacement - Auxiliary Front (Discharge Line)
EVAPORATOR TUBE REPLACEMENT - AUXILIARY FRONT (DISCHARGE LINE)
TOOLS REQUIRED
J 39400-A Halogen Leak Detector
REMOVAL PROCEDURE