SRX AWD V8-4.6L VIN A (2004)
3.
Remove the closeout panel.
4.
Disconnect the accelerator pedal electrical connector.
5.
Remove the accelerator pedal bolts (2).
6.
Remove the accelerator pedal (1) from the vehicle.
Installation
1.
Position the new accelerator pedal (1) to the vehicle.
2.
Install the accelerator pedal bolts (2).
Tighten
Tighten the accelerator pedal bolts to 5 Nm (44 lb-in).
3.
Connect the accelerator pedal electrical connector.
4.
Position the lamp to the insulator opening. Rotate the lamp.
5.
Align the insulator to the lower instrument panel.