SRX AWD V8-4.6L VIN A (2004)
Tighten
Tighten the fasteners to 2 Nm (18 lb-in).
SRX -- With Adjustable Pedals
Notice:
Handle the electronic throttle control components carefully. Use cleanliness in order to prevent damage. Do not drop the electronic throttle
control components. Do not roughly handle the electronic throttle control components. Do not immerse the electronic throttle control
components in cleaning solvents of any type.
Removal
1.
Remove the screws (2) securing the closeout panel to the I/P.
2.
Disconnect the courtesy lamp electrical connector (1).
3.
Remove the closeout panel from the I/P.
4.
Remove the screws (2) securing the knee bolster trim (1) to the knee bolster bracket.
5.
Remove the knee bolster trim (1).
6.
Remove the screws (2) securing the knee bolster bracket to the I/P
7.
Remove the knee bolster bracket.
8.
Remove the accelerator pedal assembly mounting nuts.
9.
Remove the pedal assembly from the studs.
