SRX AWD V8-4.6L VIN A (2004)
1. Install the ECM to the vehicle.
NOTE: Refer to Fastener Notice in Service Precautions.
2. Install the ECM mounting nuts (2).
Tighten
Tighten the nuts to 5 N.m (71 lb in).
3. Connect the ECM electrical connectors (1).
4. Install the front air deflector.
5. Lower the vehicle.
6. Connect the battery negative cable.
7. Program the ECM. Refer to Service Programming System (SPS) in Programming. See: Testing and Inspection/Programming and Relearning