cadillac Workshop Repair Guides

Cadillac Workshop Service and Repair Manuals

Diagram Information and Instructions|Page 4455 > < Diagram Information and Instructions|Page 4453
Page 3
background image

-

SP201 located in the right side of the instrument panel, near the steering column, taped to the instrument panel harness.

-

SP303 located in the right rear of the passenger compartment, taped to the body harness, approximately 24 cm (9.5 in) from the fuse block - right
rear.

-

SP300 located in the left side middle of the passenger compartment, taped to the body harness, near the carpet seam.

-

SP200 located in the center of the instrument panel, near the radio.

The following devices are connected to the class 2 serial data circuit in star fashion via splice packs:
-

SP201 - The DLC

-

SP303
-

The right rear door module (RRDM)

-

The radio antenna module

-

The TV antenna module

-

The vehicle communication interface module (VCIM)

-

The rear integration module (RIM)

-

The memory seat module (MSM) w/A45

-

The driver door module (DDM)

-

The driver door switch assembly (DDSA)

-

SP300
-

The audio amplifier The left rear door module (LRDM)

-

The front passenger door module (FPDM)

-

SP200 - The theft deterrent control module

Refer to Data Link Connector (DLC) Schematics and the illustration in order to familiarize yourself with the architecture of the class 2 serial data
circuit.

CONTROLLER AREA NETWORK (CAN) SERIAL DATA LINE w/M82

Diagram Information and Instructions|Page 4455 > < Diagram Information and Instructions|Page 4453