cadillac Workshop Repair Guides

Cadillac Workshop Service and Repair Manuals

Camshaft Position (CMP) Sensor Replacement - Bank 1 (Right) Exhaust|Page 3846 > < Camshaft Position (CMP) Sensor Replacement - Bank 1 (Right) Exhaust|Page 3844
Page 1
background image

Camshaft Position Sensor: Service and Repair
Camshaft Position (CMP) Sensor Replacement - Bank 2 (Left) Exhaust

CAMSHAFT POSITION (CMP) SENSOR REPLACEMENT - BANK 2 (LEFT) EXHAUST

REMOVAL PROCEDURE

1. Remove the fuel injector sight shield.

IMPORTANT:  When disconnecting more than one sensor, mark the connectors to ensure correct re-installation. The electrical connectors are
physically interchangeable, however, they must be installed to the correct sensor.

2. Disconnect the electrical connector from the left bank exhaust camshaft position sensor (2).

3. Remove the camshaft sensor retaining bolt.
4. Remove the left bank exhaust camshaft sensor (4).

INSTALLATION PROCEDURE

IMPORTANT:  Inspect the camshaft sensor O-ring for wear or damage. If a problem is found, replace the O-ring.

Camshaft Position (CMP) Sensor Replacement - Bank 1 (Right) Exhaust|Page 3846 > < Camshaft Position (CMP) Sensor Replacement - Bank 1 (Right) Exhaust|Page 3844