SRX AWD V8-4.6L VIN A (2004)
3. Install the 1-2 shift solenoid retainer into the control valve body.
4. Connect the electrical wiring harness connector (2) to the 1-2 shift solenoid (1).
5. Install the transmission fluid pan.
2-3 Shift Solenoid Replacement
2-3 Shift Solenoid Replacement
Removal Procedure
1. Remove the transmission fluid pan.
2. Disconnect the electrical wiring harness connector (1) from the 2-3 shift solenoid (2).
3. Using a small screwdriver or pick, remove the 2-3 shift solenoid retainer from the control valve body.
4. Remove the 2-3 shift solenoid (7) from the control valve body.
