SRX AWD V8-4.6L VIN A (2004)
6. Connect the roof rail module yellow connector (2) to the left roof rail module (1).
7. Install the CPA (3) to the left root rail module connector (2).
8. Install the left carpet retainer trim.
9. Install the SIR fuse into the right rear fuse center (1).
10. Install the right rear fuse center cover.
11. Position the carpet back under the right rear seat.
12. Use caution while reaching in and turn the ignition switch to the ON position. The AIR BAG indicator will flash then turn OFF.
13. Perform the SIR Diagnostic System Check if the AIR BAG warning indicator does not operate as described. Refer to Diagnostic System Check -
Restraint Systems.
SIR Disabling and Enabling Zone 3
SIR DISABLING AND ENABLING ZONE 3
DISABLING PROCEDURE
