SRX AWD V8-4.6L VIN A (2004)
12.
Install the shifter trim cover (1).
13.
Install the driver and the passenger seats to the original position.
14.
Install the SIR fuse into the right rear fuse center (1).
15.
Install the right rear fuse center cover.
16.
Install the rear seat cushion into the vehicle.
17.
Engage the center wire hook, on the back of the seat cushion, under the seat back frame.
18.
Position the rear seat buckles in the slots of the rear seat cushion.
19.
Push down and rearward to seat the rear seat cushion into the latches in the number 4 bar.
Important:
Pull up on the front of the rear seat cushion to ensure that the cushion is secure.
