cadillac Workshop Repair Guides

Cadillac Workshop Service and Repair Manuals

Recall - SRS Sensing and Diagnostic Module Replacement|Page 10121 > < Recall - SRS Sensing and Diagnostic Module Replacement|Page 10119
Page 3
background image

forward.

Customers who have recently purchased vehicles sold from your vehicle inventory, and for which there is no customer information indicated on the
dealer listing, are to be contacted by the dealer. Arrangements are to be made to make the required correction according to the instructions contained in
this bulletin. A copy of the customer letter is shown in this bulletin for your use in contacting customers. Recall follow-up cards should not be used for
this purpose, since the customer may not as yet have received the notification letter.

In summary, whenever a vehicle subject to this recall enters your vehicle inventory, or is in your dealership for service in the future, please take the steps
necessary to be sure the recall correction has been made before selling or releasing the vehicle.

Disclaimer

Service Procedure

CTS

Removal

1.

Turn the steering wheel so that the vehicle's wheels are pointing straight ahead.

2.

Turn the ignition switch to the OFF position.

3.

Remove the key from the ignition switch.

4.

Push in and pull up on the front of the rear seat cushion.

5.

Lift up and out on the seat cushion.

6.

Remove the rear seat cushion from the vehicle.

7.

Locate the right rear fuse center (1) under the rear seat, and then remove the fuse center top cover.

Important:

With the SIR fuse removed and the ignition switch in the ON position, the AIR BAG warning indicator illuminates. This is normal operation
and does not indicate an SIR system malfunction.

Recall - SRS Sensing and Diagnostic Module Replacement|Page 10121 > < Recall - SRS Sensing and Diagnostic Module Replacement|Page 10119