cadillac Workshop Repair Guides

Cadillac Workshop Service and Repair Manuals

Side Air Bag Deployment - Replacement and Inspections|Page 10205 > < Side Air Bag Deployment - Replacement and Inspections
Page 1
background image

Side Air Bag: Service and Repair
Side Impact Module Replacement - Front

INFLATABLE RESTRAINT SIDE IMPACT MODULE REPLACEMENT - FRONT

REMOVAL PROCEDURE

CAUTION:
-

Refer to SIR Inflator Module Handling and Storage Caution in Service Precautions.

-

Following the deployment of a side impact air bag, inspect the following parts for damage. Replace these parts if necessary:
-

The seat cushion frame

-

The seat recliner, if equipped

-

The seat adjuster

-

The seat back frame

Failure to do so may cause future personal injury.

1. Disable the SIR system. Refer to SIR Disabling and Enabling Zone 7 for driver's seat or SIR Disabling and Enabling Zone 9 for passenger seat.

IMPORTANT: Removal of the right or the left inflatable restraint side impact module uses the same procedure.

2. Move the seat to the full forward position.
3. Remove the seat back panel cover (2) from the seat (1) by pulling out the top of the panel and lifting the bottom away from the seat to release the

hook retainers.

4. Remove the 2 bolts (1) from the inflatable restraint side impact module bracket.

Side Air Bag Deployment - Replacement and Inspections|Page 10205 > < Side Air Bag Deployment - Replacement and Inspections